🧯 Samsung Washer Error Codes Explained (And How to Fix Them) – Lethbridge Appliance
- gerardosalvarado
- 4 hours ago
- 2 min read
Samsung washers are known for their high performance, but like any smart appliance, they can throw confusing error codes when something goes wrong. If you're in Lethbridge and seeing flashing symbols on your Samsung washing machine, don’t panic — we’re here to help.
At Lethbridge Appliance, we specialize in Samsung washer repair and have put together this guide to the most common error codes and what they mean.
❗ 1. UE or UB – Unbalanced Load
What it means: Your washer can’t spin because the load is uneven.Fix it:
Open the washer and redistribute the laundry evenly.
Avoid mixing large and small items in one load.
Run a spin cycle again.
If it keeps happening, your suspension system or dampers may be worn and need servicing.
💧 2. 4C or 4E – Water Supply Error
What it means: The washer isn't getting enough water.Fix it:
Make sure the water valves are fully open.
Check for kinked or blocked inlet hoses.
Clean the inlet filters.
Still not filling? The inlet valve may need to be replaced — we offer same-day washer repair in Lethbridge for this.
🌊 3. 5C or 5E – Drain Error
What it means: The washer can’t drain properly.Fix it:
Check the drain hose for clogs or kinks.
Clean the debris filter (usually near the bottom front of the washer).
Listen for unusual pump noises.
If the pump is damaged or clogged deep inside, give us a call — we’ll get it flowing again.
🔌 4. 3E – Motor Error
What it means: There's an issue with the drive motor or its signal.Fix it:
Unplug the washer for 2–3 minutes and restart it.
If the error persists, the motor hall sensor or control board may be faulty.
We offer expert Samsung washer motor diagnostics and repairs in Lethbridge.
🔒 5. dE or dC – Door Error
What it means: The washer door won’t lock or unlock.Fix it:
Make sure the door is shut tightly.
Check for obstructions like clothes caught in the door seal.
If it won’t lock, the door latch assembly may need replacement.
This is a common issue in high-use homes — and an easy fix for our certified techs.
🌐 6. LE or LC – Leak Error
What it means: The machine has detected a water leak.Fix it:
Look for water around the washer or underneath.
Check hoses and tub for cracks or loose connections.
If it keeps happening with no visible leak, it may be a sensor issue.
Water damage can worsen quickly — let us handle this safely and correctly.
⚙️ 7. bE – Button Error
What it means: One or more buttons are stuck.Fix it:
Gently press each button to make sure they’re not jammed.
Power cycle the machine.
If the issue continues, the control panel may need inspection.
🛠️ Lethbridge’s Samsung Washer Repair Experts
Whether it’s a simple sensor reset or a deeper motor issue, Lethbridge Appliance is your go-to for Samsung appliance repair. We’ll troubleshoot the error code, explain the fix, and get your washer back in action — without the guesswork.
📞 Book a Service Today
Call us at 403-360-7240 or use our online contact form. We respond fast — even after hours.
Lethbridge Appliance – Honest, Local, Expert Repair You Can Trust.
Comentarios